Product Overview
Features
- Reduces the risk of performance degradation associated with long-term storage of electron tubes (klystrons).
- Recipes for current, voltage, and time for aging can be set, allowing for optimal aging while monitoring conditions.
All settings can be displayed and set digitally, and warning values can also be managed digitally. - The electron tube can be easily installed by placing it on the temporary stand on the top of the unit and then sliding it down.
Since no special jig or tool is used for installation, no man-hours are wasted. - During operation, the status of the electron tube can be viewed through the transparent panel, and the interlock mechanism and safety measures against electric shock, burns, and dropping are all in place.
- A pat light, network notification of end of operation, and transfer of test data logs can be set as options. (CSV, TXT, PDF are supported)
- The following is a list of electron tubes currently supported. (Other electronic tubes can also be supported by changing the recipe.)
Supported electron tubes
| Electron Kan Type Name | Manufacturer |
|---|---|
| VA874T | CPI |
| E37100,L1/H2 | Canon Electron Tube Devices |
| K261 | Nisshinbo Microdevices Inc. |
| RKV60H09125A03/02 | Toshiba Infrastructure Systems |
specification sheet
| For Heater Power source | Output voltage | DC 5.0V ～7.5V |
|---|---|---|
| Output current | Rated 2.8A | |
| Preheat time | 0 to 30 min | |
| Limiter operating current | 4.0A or more (operating start current range ±0.5A) | |
| For Beam Voltage Power Supply | Output voltage | DC -1200V ～-1600V |
| Output current | Rated 50mA | |
| Voltage ripple | 3% or less of output voltage | |
| Limiter operating current | 70mA or more (operating start current range ±10mA) | |
| Safety features | High-pressure interlock function | |
| Continuous operation limitation function (up to 10 hours) | ||
| Cooling | forced air cooling | |
| Power (button on TV, etc.) | AC100V±10％ 50/60Hz | |
| Power consumption | 480VA or less | |
| Dimensions (H x W x D) and weight | H920 x W550 x D620mm (excluding protrusions) | |
| Max. 50 kg (not including klystron) | ||
| Environmental conditions | Temperature | ＋5℃ ～＋35℃ |
| Level of humidity | 40% to 85% RH (no condensation) | |
| Accessory | Power cable and installation ground wire | |
| Option | Patlite Data Transfer Unit | |
Interface Inc. is committed to your concerns.
Our products are designed and manufactured entirely in Japan and can be delivered in a short time.
We can provide technical support during installation.
Feel free to contact us for more information.
Other Product Information
- Angle Position Indicator/output
- Asynchronous Premises modem MP IF-475
- Controller for ultra-short pulsed lasers
- High voltage high current switch
- In-store broadcasting equipment and automatic emergency evacuation site broadcasting equipment
- Leakage monitoring LTE terminal
- Legacy Modems
- Production of interchangeable products for discontinued products
- Sic High Voltage Switch
